- 6 months ARA Warranty (back to base)
- Compatible for Gates & Garage Door Motors
- Up to 30 User Fingerprint
- 4 Channels to Operate 4 Door Openers
- Waterproof and Suitable for Indoor or Outdoor
- No Keys/ Remotes Needed
- Security at its Best
- The buzzer beeps after power on, if the green light flash for 1 second, it means the fingerprint module normally works; if the red and green light flash alternately, it means communication error, please verify that the fingerprint module is normal and its connection is correct, otherwise, the device cannot work.
- There are 4 output channels inside, to control the corresponding channels signal output by registering fingerprints.
- Set up a manager fingerprint to manage users’ fingerprint registration, channel selection and the deletion of all registered fingerprints. Note that the manager fingerprint cannot be used as users’ fingerprint.(it cannot control signal output).
- When the user press the fingerprint and after it’s valid, the corresponding channel will output signal for 1 second, at the same time the green light will flash for 1 second, and the buzzer beeps for 1 second. If the fingerprint is invalid, the buzzer beeps 4 times.
- Low battery detection: press fingerprint in standby status, if the red light quickly flash for about 2 seconds, it indicates low battery, please replace battery.
- D.I.Y Installation instruction provided to assist you with the installation of the Fingerprint Remote Control
- Please call 1800 27 22 27 if you require any technical assistance and one of our friendly staff will be happy to assist you
- The ARA Wireless Fingerprint Remote Control comes with 6 month full warranty for your peace of mind
- Power: 4 x AA alkaline battery
- Life of battery: 1 year (use 10 times every day) 3．Frequency: 433.22 MHz +/-75KH
- Transmitting power: approx 10mW
- Code: HCS301 standard
- Working distance: 100m outdoor and 30m indoor 8．IP grade: IP54
- Working temperature: -20℃ to +55℃