Panel/Sectional Garage Opener, Bluetooth Receiver, 3 x Remotes
$621.00Original price was: $621.00.$435.00Current price is: $435.00.
The MARK2-V2 is designed In Australia. This opener is capable of operating a large tilt or panel garage door. With a whopping 1000 nm of maximum output and a large variety of practical functions, this powerful and precisely designed unit will impress you and will suit all Sectional/ Panel Garage Doors. Durable and reliable without breaking the bank!
This stylish unit is packed with features! Equipped with a heavy duty DC powered driving motor, the unit is capable of operating a range of doors from small single doors to extremely tired, large, and heavy double Panel/ Tilt doors. The motors are designed and tested on doors with a resistance of approx. 81.5kg. The standard domestic garage door should operate between 8-18 kg of resistance dependent on the size and condition of your garage door. This making the ARA Mark2-V2 Opener the ultimate choice for any Panel/ Tilt Door Opener.
Go for a jog and leave behind those annoying keys. The Bluetooth Receiver is one of the most secure garage door openers available and takes advantage of Bluetooth security and your phone's password protection. The simple installation takes 2 minutes. Free mobile app will be provided. Even if someone else has the App they will not be able to open your garage without your permission. Only phones that have been previously “paired” to the Receiver can open your garage door. Also, because you can password protect your phone, we believe this is the most secure way to access your home. If you lose your phone no one can enter your home (assuming the password is on). The same can't be said for keys and your other garage door remotes.
Automatic Remote Access also offers many other accessories for garage doors and gates such as Fingerprint Remote Control, Wireless Keypad Entry and many other smart gadgets. For more information please contact us.
Soft Start & Stop – which is a function that accelerates and reduces the speed at the beginning and end of the cycle which significantly reduces the stress put onto the motor, increasing its life expectancy.
The Mark2-V2 motor has an automatic close function which can only be utilized if installed with Photo Beam sensors.
The Mark2-V2 motors offer as much power as the older AC Motors but with drastically reduced noise and vibration, offering smooth and reliable operation without the strenuous noise.
Standby Power Usage – Our motor is the one of the lowest standby power consuming units in Australia.
Space Efficiency – The Mark2-V2 is a very compact which allows it to be fitted even when headroom is limited.
Imbalanced Sensors – The unit monitors the spring balance of the door, and will indicate when the door is out of balance through a flashing LED light every 15 seconds, once the imbalance is detected.
The garage will be illuminated once the motor is engaged and will automatically turn off after 2 minutes has lapsed.
Vacation Mode Disables push button functionally to provide utmost security whilst user is absent for extended periods of time.
Anti-Collision Safety sensor – Should your door be interrupted while in its motions, it will automatically reverse to avoid injury in shutting on someone, or causing damage to any goods or vehicles.
Manual Disengagement allows you to open and close your garage door manually in the event of power failure.
Support Original Steering Wheel Control.
INSTALLATION
D.I.Y Installation Manual to assist a handyman with the installation of the MARK2-V2 unit, however ARA Recommends a professional Installer to carryout the installation of your garage door motor!
Installation is available within Melbourne Metropolitan
Please call 1800 27 22 27 to clarify whether your area is covered
The ARA Mark2-V2 Motor comes with 7 years full warranty if it is installed by ARA trained staffs for your peace of mind
SPECIFICATIONS
Mark2-V2 Motor:
433.22 Mhz AM radio with rolling code (1.2 billion combinations)
Input Voltage: 240V AC
24V DC Motor
Pulling Force: 800 nm Continuous, 1000 nm max output!!!
LED Display Screen
Light: 24V 21W incandescent
24V Accessory Output
Transmitter: 27A 12V Battery
Working Temperature -20°C to +50°C
Relative Humidity: <= 90%
ARA Bluetooth Receiver
Receiving distance: 30m (open space and non-interfering)
Working power: AC/DC 12-24V
Max working current: 60mA
Output Channel: 3 channels relay
Working temperature: -20℃ to +55℃
Additional information
Weight
7 kg
Dimensions
345 × 10 × 17 cm
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.